Leather buttstock cartridge holder

1. After using the gun, be sure to remove all cartridges and allow the sleeve, sling or pouch to dry for several days.  As soon as leather products get wet from rain or high humidity, remove them from the gun and dry them, but not under the influence of sunlight.
2. It is also recommended to remove cartridges when storing the gun for a long time. Store the gun with the leather accessories in a dry room with less than 50-60% humidity. Read the rules for storing the gun in the instructions for it.
3. To reduce the absorption of moisture into the leather, use universal waterproofing (water repellent) sprays (the same as for shoes). Process leather, suede,  lacing and ammo loops (inner side of them too). Do this before each use. Such sprays protect products from dirt as well.
4. Use wet wipes to clean leather and suede. In case of heavy contamination, you can wash off the dirt with a stream of cold water. After that, dry the product and treat it with a water-repellent spray. You can use colorless protective creams (like shoe creams) but this can affect the color of the leather and suede.

All items make to order only. We need 2-3 days for fulfilling.  Products such as slings and belts usually take longer to manufacture.

Standard Expedited (we provide tracking number) delivery takes about:

1. USA – 12-15 days
2. Canada, Australia – 15-20 days (In the territory of the recipient, the track system may not display statuses)
3. Europe – 10-12 days
4. Other – 15-30 days, depend on your location

Warning! During the high season, especially before the New Year holidays (November-December) and others, there may be delays in the work of postal services.

Warning!! Due to the insidious aggression of the Racists and the invasion of their terrorist groups on the territory of Ukraine, the workshop in Kyiv may work with delays.

We can make such wraps for levers. Please let us know your measurements: L1, G1, L2, G2.  This addition will be for free. These will be rectangular perforated pieces of leather and thread for self-stitching.

For Lever action rifle, lever-action firearms, levergun

1. Put the sleeve on the butt. Insert the lace into eyelets. Tighten slightly to take shape. Tighten the laces in 1-2 days for strong holding.
2. The standard length of the lace is 120 cm. 100 cm is enough for tightening on the butt. The ends can be trimmed.
3. If it seems that the loops are too tight: you need to place the sleeve on butt and insert the cartridges. Somewhere in two or three days the leather will acquire the desired shape and the cartridges will be easy to insert and remove.
4. We use high-quality Italian leather. By the way, it is used in the manufacture of footwear and has a high resistance to loads during use. You can search the leather description by the phrase: “crazy horse leather”. You can use the usual leather care products, be sure to read the instructions for them.

As a standard for our models, we accept buttstock sizes:  a= 5″ (13 cm), b=8″ (20 cm) , c= 3″ (8 cm). Allowable deviation 10%. Before ordering, make sure that these numbers match your needs. If necessary, write to us and we will adjust the size of the sleeve to your size.

If the stock of your gun does not look like the picture, it is best to ask us.