Small buttstock sleeve with anti slide protective loop

1. After using the gun, be sure to remove all cartridges and allow the sleeve, sling or pouch to dry for several days.  As soon as leather products get wet from rain or high humidity, remove them from the gun and dry them, but not under the influence of sunlight.
2. It is also recommended to remove cartridges when storing the gun for a long time. Store the gun with the leather accessories in a dry room with less than 50-60% humidity. Read the rules for storing the gun in the instructions for it.
3. To reduce the absorption of moisture into the leather, use universal waterproofing (water repellent) sprays (the same as for shoes). Process leather, suede,  lacing and ammo loops (inner side of them too). Do this before each use. Such sprays protect products from dirt as well.
4. Use wet wipes to clean leather and suede. In case of heavy contamination, you can wash off the dirt with a stream of cold water. After that, dry the product and treat it with a water-repellent spray. You can use colorless protective creams (like shoe creams) but this can affect the color of the leather and suede.

All items make to order only. We need 2-3 days for fulfilling.  Products such as slings and belts usually take longer to manufacture.

Standard Expedited (we provide tracking number) delivery takes about:

1. USA – 12-15 days
2. Canada, Australia – 15-20 days (In the territory of the recipient, the track system may not display statuses)
3. Europe – 10-12 days
4. Other – 15-30 days, depend on your location

Warning! During the high season, especially before the New Year holidays (November-December) and others, there may be delays in the work of postal services.

Warning!! Due to the insidious aggression of the Racists and the invasion of their terrorist groups on the territory of Ukraine, the workshop in Kyiv may work with delays.

We can make such wraps for levers. Please let us know your measurements: L1, G1, L2, G2.  This addition will be for free. These will be rectangular perforated pieces of leather and thread for self-stitching.

For Lever action rifle, lever-action firearms, levergun

10 Gauge, 12 Gauge, 16 Gauge, 20 Gauge, 28 Gauge, 410 Bore, 17 hmr, 17 WSM, 17 Ackley Bee, 218 Bee, 22 Long Rifle, 22 Winchester MAG, 22 Hornet , 22 K-Hornet, 22-250 Remington, 204 Rugger, 220 Swift, 221 fireball, 222 Rem, 223 Rem 5,56×45, 243 Win, 25-06 Rem, 25-35 Winchester, 257 Roberts, 257 Weatherby, 260 Remington, 264 WinMag, 270 WSM, 270 Win, 280 Ackley Improved, 284 Win, 28 Nosler, 30 Carbine (7,62×33), 30-06 Springfield,30-30 Winchester, 30-40 Krag, 300 blackout, 300 RUM,300 Winchester Mag, 300 WSM, 300 Weatherby Mag, 303 British,300 PRC, 308 Winchester, 325 WSM, 338 Marlin Express,338 Winchester MAG, 338 Lapua Mag, 35 Remington, 35 Whelen,35-300 WSM, 350 legend, 357 Mag, 375 H&H MAG,375 Win, 375 Ruger, 376 Steyr, 38 Special,38-55 Win, 404 Jeffery, 41 MAG, 416 Rigby,44 MAG, 44-40 Winchester, 444 Marlin, 45 Long Colt,454 Casull, 45-70 Gov,45-90 WCF, 450 Bushmaster, 450 Marlin, 458 Win MAG, 458 Lott,  .50-70 Government, 6 mm ARC,6.5 Creedmoor, 6.5 Grendel, 6.5×55 Swedish, 6.5 PRC, 6.8 SPC, 7×57 R, 7×57mm Mauser, 7×64 Brenneke, 7mm Rem MAG, 7mm Rem U-MAG, 7mm WSM, 7mm-08 Remington, 7.5×55mm Swiss , 7.62x39mm, 7.62×54 R, 8mm Mauser 8x57JS, 500 S&W magnum, 9mm Luger, 9.3 х 62 Mauser, 9.3 x 74r , 50 Alaskan, 12.7x44R , etc.

1. Put the sleeve on the butt. Insert the lace into eyelets. Tighten slightly to take shape. Tighten the laces in 1-2 days for strong holding.
2. The standard length of the lace is 120 cm. 100 cm is enough for tightening on the butt. The ends can be trimmed.
3. If it seems that the loops are too tight: you need to place the sleeve on butt and insert the cartridges. Somewhere in two or three days the leather will acquire the desired shape and the cartridges will be easy to insert and remove.
4. We use high-quality Italian leather. By the way, it is used in the manufacture of footwear and has a high resistance to loads during use. You can search the leather description by the phrase: “crazy horse leather”. You can use the usual leather care products, be sure to read the instructions for them.

As a standard for our models, we accept buttstock sizes:  a= 5″ (13 cm), b=8″ (20 cm) , c= 3″ (8 cm). Allowable deviation 10%. Before ordering, make sure that these numbers match your needs. If necessary, write to us and we will adjust the size of the sleeve to your size.